|
Three sizes to fit most panel thickness. Use with corner clips
listed below for a fast, professional installation.
No mitering required when using corner clips.
Available in Black.
Trim is 4' long per piece.
 |
|
Use with L-Molding listed above for a fast, professional
installation. No mitering required when using corner
clips. One #8 drill point screw and it's done.
Available in Black (LMCC-BK).
 |
|
Same as L-Molding but with added support shelf to hold
semi-rigid urethane or rubber sheet for an air tight and dust
free installation.
35 - 4' long pieces per box. 140' total per box.

|
|
Ideal for cutouts against a wall or edge of panel.
Quick installation. Cut a rough 6" x 6" square opening
in the panel. Three #8 sheet metal type screws and it is installed.
Available in Black (PC66-BK).

|
|
Ideal for cutouts against a wall or edge of panel. Quick
installation. Cut a rough 4" x 6" rectangular opening
in the panel. Three #8 sheet metal type screws and it is
installed.
Available in Black (PC46-BK).

|
|
Ideal for cutouts against a wall or edge of panel.
Quick installation. Cut a rough 4" x 4" square opening
in the panel. Three #8 sheet metal type screws and it is installed.
Available in Black (PC44-BK).

|
|
Ideal for cutouts against a wall or edge of panel.
Quick installation. Cut a rough 4" x 2" rectangular opening
in the panel. Three #8 sheet metal type screws and it is installed.
Available in Black (PC42-BK).

|
|
Quick installation. Cut a 2 " hole in floor panel with a
hole saw. Firmly press the grommet into the hole. Crushable
ribs hold grommet securely in place.
Available in Black (RG200-BK).
 |
|
Quick Installation. Cut a 3" hole in floor panelwith a hole
saw. Firmly press the grommet into the hole. Crushable ribs hold
grommet securely in place. Available in Black (RG300-BK).

|
|
Quick installation. Cut a 4" hole in floor panel with a
hole saw. Firmly press grommet into hole. Crushable ribs hold
grommet securely in place. Cap rotates to select 1, 2, 3 or 4
cables.
Available in Black (RG400-BK).

|
|
Quick installation. Cut a 5" hole in floor panel with a
hole saw. Firmly press grommet into hole. Crushable ribs hold grommet
securely in place. Cap rotates to select 1, 2, 3 or 4 cables.
Available in Black (RG500-BK) only.

|
|
Quick installation. Cut a 6" hole in floor panel with a
hole saw. Firmly press grommet into hole. Crushable ribs hold grommet
securely in place. Cap rotates to select 1, 2, 3 or 4 cables.
Available in Black (RG600-BK) only.

|
|
Cap has provisions for one, two or three cable openings. Use
as a large grommet (equivalent to a 5" round grommet in area)
or attach an electrical box.
Available in Black (SG44-BK).

|